Shell AeroShell Fluid 3 - 6 x 3.7L

Main Applications

• AeroShell Fluid 3 is recommended for general lubrication of aircraft parts that require a light oil, e.g. hinges, pivot joints, shaft joints, linkage pins and bearings, pulleys, cables, camera mechanisms, radio and radar gear and instruments.
• AeroShell Fluid 3 is normally applied by means of an oil can or brush. For this reason it is also described as ‘an oilcan lubricant’.
• Operating temperature range of AeroShell Fluid 3 is -54ºC to +121ºC.
• For high temperature applications where no provision is made for frequent re-lubrication the synthetic oil, AeroShell Fluid 12, should be used in place of the mineral oil, AeroShell Fluid 3; however in this case care should be taken to ensure that there is no incompatibility between AeroShell Fluid 12 and seals, paints etc.

Downloads

• Safety Data Sheet (SDS)
• Technical Data Sheet (TDS)

Specifications & Approvals

MIL-PRF-7870E, DEF STAN 91-47 (Obsolete), NATO Code O-142, Joint Service Designation OM-12 (Obsolete).